Internal insulation
TIPWall for internal insulation of external walls. TIPWall compact plus is the slim variant for mould prevention and reducing thermal bridges.
Multipor TIPWall →Multipor TIPWall compact plus →FERKL · Building materials · Multipor
Mineral insulation boards and system components for internal walls, ceilings, façades, flat roofs and ExSal Therm desalination. Select each system separately.

Multipor
TIPWall for internal insulation of external walls. TIPWall compact plus is the slim variant for mould prevention and reducing thermal bridges.
Multipor TIPWall →Multipor TIPWall compact plus →TIPCeiling for ceiling insulation, including basements and underground car parks. Select fixings and surface treatment for the intended build-up.
Multipor TIPCeiling →TOPWall for external wall insulation in a system partner’s approved ETICS build-up. Boards, adhesive mortar, fixings, reinforcement and finish must belong to that system.
Multipor TOPWall →TOPRoof-F flat-roof insulation boards and TOPRoof-S tapered boards. Roof build-up, falls, loads and waterproofing require project-specific design.
Multipor TOPRoof-F →Multipor TOPRoof-S →Multipor roof junction wedge →Multipor counter-fall wedge →Multipor roof saddle (Dachreiter) →ExSal Therm for desalination and insulation on the inside of salt-contaminated, damp masonry. Use the associated ExSal Therm mortar.
Multipor ExSal Therm →Multipor
26 Product families

Mineral internal insulation system for external walls in renovation and new construction, open to water vapour diffusion and capillary-active. Coordinated system components are required.

Multipor Reveal · 600 × 250 × 20 mm. Mineral reveal boards for door and window reveals without a change of material.

Multipor Wedge · 390 × 500 × 60/20 mm. Insulation wedge for adjoining building elements in the internal insulation system.

Compact mineral internal wall insulation for mould prevention and reducing thermal bridges within the system, particularly when renovating existing buildings.

Mineral internal insulation system for renovating and improving the energy performance of salt-contaminated, damp masonry. The board absorbs moisture and dissolved salts; moisture evaporates while the salts remain in the board.

Mineral ceiling insulation system, for example for basement ceilings or underground car parks. The schematic shows lightweight mortar, insulation board and surface treatment.

Mineral external wall insulation board. The approved external thermal insulation composite system, including all required components, must be coordinated with the relevant system partner.

Mineral flat roof insulation board for high loads. Flat boards and tapered boards are planned for each project.
Mineral tapered boards for project-specific flat roof insulation.
Multipor · 600 × 100 × 100 mm. Junction wedge for the project-specific roof solution.
Multipor · 600 × 390 mm. Counter-slope wedge for roof solutions, quoted individually for each project.
Multipor Dachreiter. Roof component quoted individually for each project.

Multipor FIX X702: mineral lightweight mortar in the Multipor system for bonding, reinforcement and finishing coats; 20 kg bag. Each application step has its own consumption rate.

Multipor ExSal Therm FIX X730: mineral lightweight mortar in the ExSal Therm system for bonding, reinforcement and finishing coats; 20 kg bag. Each application step has its own consumption rate.

Multipor FIX R140: mineral filling mortar for repairs and local making-good, in a 12.5 kg bag.

Multipor FINISH GP830: lime skim coat for smooth interior surfaces, in a 20 kg bag.

Multipor reinforcement mesh with a 4 × 4 mm mesh size for full-surface embedding in Multipor lightweight mortar; 25 m² per roll, 1 m roll width.

Multipor hemp-felt insulation strip for decoupling; 50 mm wide, 5 mm thick, 25 m per roll.

Multipor bucket with a 20 l capacity for installation work.

Multipor sanding board for sanding Multipor surfaces.

Multipor notched trowel with 12 × 12 mm teeth for bonding insulation up to 140 mm thick and for the reinforcement layer.

Multipor handsaw, a special-purpose saw for cutting Multipor insulation boards.

Multipor DDS-Z ceiling fixing, 85 mm long, for cracked and uncracked concrete and building elements subject to fire protection requirements; cannot be rendered over.
Multipor STR U 2G screw-in anchor, 115 mm long, for building elements without fire protection requirements; its anchor plate can be rendered over.

Multipor closing plug for sealing the screw-hole opening in the Multipor screw-in anchor; 500 pieces per pack.

TX30 bit for installing the Multipor screw-in anchor flush with the surface; 200 mm long.
multipor · Project
Published areas per pallet may be rounded. The calculator rounds up using the required piece count and stated pieces per packaging unit; area figures remain approximate.
Mineral internal insulation system for external walls in renovation and new construction, open to water vapour diffusion and capillary-active. Coordinated system components are required.
FERKL · Enter quantity directly
The calculator is optional. If you know your quantity, you can enquire directly.
Please select a product first.
BUILDING MATERIAL QUOTE ENQUIRY